Skip to content
Transport Fever 3 ToolsUnofficial fan toolkit
A Transport Fever 3 city of high-rise blocks in a dry valley at dusk, seen from a winding road on a wooded hillside, with flat-topped mountains behind

Guide

Transport Fever 3 Crashing: Fixes and Crash Log

Update Transport Fever 3 first: the latest builds fix 6 crashes and errors. A crash, a black screen or Failed to create SDL Window at startup starts with the latest graphics driver, or a clean reinstall of it. A screen that goes black after a change to the graphics settings comes back with Alt+Enter; one that goes black in the middle of a game usually needs a newer driver too, and a computer that switches itself off is usually too hot. Crash dumps and the log are in the crash_dump folder, and the newest dump is what Urban Games asks for.

Last updated Game version: Release version, manual page revised 2026-10-08

The short answer

  • Update first. Check which build you have on the updates page; Version 40444 fix 6 crashes and errors. The list
  • Crashes at startup, or Failed to create SDL Window? Install the latest graphics driver; sometimes only a clean reinstall of the driver helps. Still failing? Remove the driver completely and install it again. All startup fixes
  • Black screen? It depends on when it goes black.
    When the screen goes blackWhat to do
    The moment the game startsUpdate the graphics driver or reinstall it cleanly, and make sure the game runs on the separate graphics card rather than the built-in one. Steps
    Right after you change a graphics settingAlt+Enter brings a window back; then choose a resolution your monitor can show. Steps
    In the middle of a game, with the sound still runningInstall the newest graphics driver: an outdated one is the usual cause. Steps
    The whole computer goes dark or switches offIt is shutting down to protect itself, most often from heat: watch the temperatures and turn the graphics down. Steps
    The game sits in the taskbar, but no window showsThe window opened on another screen or past the edge: Win+Shift+Left or Right pulls it back, Alt+Enter switches to window mode. Steps
  • Crashes while loading a save? Load the save with all mods switched off. Three steps
  • Crashes while you play? Urban Games names two causes: 13th and 14th Gen Intel processors and the Park & Ride mod. What to do
  • Crash dump and log: the crash_dump folder. With Steam on Windows: C:\Program Files (x86)\Steam\userdata\<user-number>\3493540\local\crash_dump. The .dmp files are the dumps, stdout.txt is the log; send Urban Games the newest of each. Other stores and Mac · How to report it

Internal error, An error just occurred, Assertion failure

Most crashes come with one of these messages. Here is what each one means and what to try first.

Internal error: “An error just occurred”

This is the game's general crash message. It names no cause, so the fix depends on when it comes up:

  • As soon as the game starts: remove programs that hook into the graphics, such as a leftover ReShade folder. Startup fixes
  • While a new game loads: start the new game again with the tutorial switched off. Loading fixes
  • While you play: update to the newest build, then report the crash. Urban Games says that on a computer that meets the minimum requirements, a crash like this is probably something they can fix. How to report it

Assertion failure

An assertion failure means the game stopped because one of its own checks failed. The text after “Assertion” names the check, and two of them come up in Transport Fever 3:

  • Assertion `count <= cap' failed comes when the game saves, in some games on every save. Checking the game files may fix it. The steps
  • Assertion failed in DynamicModelRenderer.cpp:444: Urban Games has passed a player's report on to the colleague looking into it, so send your crash log through the support form. More on this one

For any other assertion, follow the steps for when it happens, while loading a save or while you play, and send the crash log with your report.

Crashing at startup or on launch

If the game will not start, closes at once with an error, or crashes on its first screen, go through these in order:

  1. Compare your computer with the minimum requirements: below them, the game may not start at all.
  2. Processors without AVX2 cannot run the game. Macs need Apple silicon, as Macs with an Intel processor are not supported, and only 64-bit systems work.
  3. Install the latest graphics driver; sometimes only a clean reinstall of the driver helps.
  4. Check the game files in your store app.
  5. Switch off or remove overlays and monitoring, recording or security software, such as OBS Studio, RivaTuner or an antivirus program.

Broken graphics, or a crash on the first screen

  1. Close the game and delete the shader_cache folder in your user data folder.
  2. If that does not help, check the game files in your store app.

Broken graphics or a crash right at startup can come from the shaders: try deleting the shader_cache folder.

Failed to create SDL Window

For a game that will not start, the Known Issues page first suggests the latest graphics driver, and says a clean reinstall of the driver is sometimes needed. (Known Issues page, October 8, 2026) Update the graphics driver; with an AMD driver, removing it completely and installing it again can also fix it.

Internal error right after the game starts

An Internal error as soon as the game starts: remove programs that hook into the graphics, such as a leftover ReShade folder or AGAUeye.

A black screen instead of a crash

The game freezes on a black screen when it starts:

  1. Install the latest graphics driver; sometimes only a clean reinstall of the driver helps.
  2. On a computer with both a built-in and a separate graphics card, check that the game uses the separate one: open stdout.txt in the crash_dump folder and find the line Selected device. Its number should be the one given to the separate card a few lines further up.
  3. Windows sets the preferred graphics card under Settings › System › Display › Graphics; the NVIDIA App, the NVIDIA Control Panel and AMD Software can do it too.

The screen went black after you changed the graphics settings:

  1. Press Alt+Enter, which flips the game between full screen and a window.
  2. If the game shows up again, open the graphics settings and pick a resolution and display mode that your monitor supports.
  3. Still black? Close and restart the game, then put the graphics settings back to default.

The window goes black partway through a game:

  1. Install the newest graphics driver. A window that turns black partway through a game while the sound plays on is most often down to an outdated one.
  2. Until it is solved, lose less when it strikes: a shorter Autosave Interval under Settings › Advanced saves more often.
  3. Still happening? Keep an eye on the graphics card's temperature while you play, with any free hardware monitor, and turn the graphics settings down if it runs hot.

The whole computer goes dark or turns off while you play:

  1. A computer that cuts out on its own is guarding its parts, usually against heat and sometimes because the power supply cannot keep up.
  2. Watch the processor and graphics card temperatures while the game runs.
  3. Drop to the lowest graphics preset. If it still overheats there, the cooling or the hardware is the limit.

How your computer compares with what the game asks for is in the minimum and recommended specs.

The game shows in the taskbar, but no window opens

  1. With more than one screen connected, the window may have opened on a different monitor, or off the edge of the desktop. On Windows, select the game and press Win+Shift+Left or Win+Shift+Right to move it.
  2. Or press Alt+Enter to switch to window mode.

It will not start on Linux or a Mac

  1. Launch the game from a terminal window and read what it prints: missing libraries or other errors show up there. This works on a Mac too.
  2. Check that Vulkan is installed correctly and that other programs using Vulkan work.

The minimum and recommended specs for Windows, macOS and Linux are in the system requirements guide.

Crashing while loading a save or a new game

The game crashes while loading a save or creating a new game? Urban Games' Known Issues page suggests three steps:

  1. Load the save with all mods switched off.
  2. Sign out of the Mod Hub, then start the game again.
  3. Delete the shader_cache folder in your user data folder.

With an Internal error while a new game loads: turning the tutorial off when you start a new game can help with this error; in one case the crash came at about 99% of loading.

A Lua error in campaign mission 2: staff called it a known problem when loading mission 2 after bulldozing the tracks of the signal task. The fix came in preview build 40417, with more work in 40419. (Urban Games, October 2, 2026) The campaign guide has the mission.

Crashing while you play

13th or 14th Gen Intel Core processor

Urban Games sees more crashes than usual on these processors, which can be unstable because of a hardware problem, and recommends updating the computer's BIOS to the latest version. Intel's support page has the details. (Known Issues page, October 8, 2026) Intel's support page on the instability

The Park & Ride mod

Urban Games saw more crashes on computers running the popular Park & Ride mod and advised switching it off. The mod's update of October 9, 2026 fixed the crashes, though small errors can still pop up while its author works on a full fix. (Known Issues page, October 9, 2026) The mod's page and discussion on mod.io

Out of video memory

Staff asked players with this error to try the preview branch, which has the first fixes. Urban Games has not said the error is fixed; preview builds changed how video memory is used (see the update notes further down). (Urban Games, October 2, 2026) Until then, a lower texture quality leaves more video memory free.

Assertion failed in DynamicModelRenderer.cpp

Staff passed a player's detailed report on to the colleague investigating this crash. No build has been named as the fix yet, so send your logs through the support form. (Urban Games, October 2, 2026)

Assertion `count <= cap` failed when the game saves

It comes up as a fatal error when the game saves, in some games on every save, autosaves included. Checking the game files may fix it. The steps for your store app are under If nothing helps.

Internal error while playing

If your computer meets the minimum requirements and the game still crashes, Urban Games says it is probably something they can fix, and asks you to get in touch through the support form. (Urban Games, October 2, 2026) Staff confirm that the automatic crash reports reach them, and suggest the Steam preview branch, which holds the first crash fixes. (Urban Games, October 2, 2026)

Low frame rate and stutter are not crashes; the fixes for them are in the graphics settings section of the save guide.

Crashes fixed in updates

Your crash may already be fixed. Check which build you have on the updates page. The release notes list these crash and error fixes in Version 40444, the release build on PC, PlayStation and Xbox since November 19, 2026. Staff posts above that point to the preview branch are from before Version 40444.

Version 40444, release build, November 19, 2026:

  • Mod Hub errors such as 20997, 20487 and 20489 are handled better.
  • No more crash when you change tram tracks at a two-way junction.
  • No more crash when you start a new game with mods you have unsubscribed from.
  • A rare crash while building streets is fixed.
  • Importing towns and industries into the map editor no longer crashes.
  • Missing mod files such as meshes, badly set vehicle icons and invalid build proposals no longer crash the game.

From the official manual

Where the crash log is

The crash_dump folder collects three kinds of file: .dmp files with crash data for software to read, .json files describing your settings and hardware, and .txt files with the game's log. In the game, Settings › Advanced › Open User Data Folder opens the folder that holds crash_dump. Pick your store and system to copy the path:

Where you bought the game

Your computer

Steam on Windows

Open the user data folder in one go

Press the Windows key + R, paste this and press Enter:

C:\Program Files (x86)\Steam\userdata

Then open the numbered folder of your Steam account, and in it 3493540 › local.

  • User data folder

    C:\Program Files (x86)\Steam\userdata\<user-number>\3493540\local
  • Crash reports and logs

    C:\Program Files (x86)\Steam\userdata\<user-number>\3493540\local\crash_dump

Quickest way on a computer: Settings › Advanced › Open User Data Folder opens the user data folder for you. Install locations can differ. Under Steam, <user-number> is the numbered folder of your Steam account; <username> is your user name on the computer. On macOS the Library folder is hidden in Finder by default.

Report a crash

With Send Crash Reports switched on in Settings › Advanced, the game sends an anonymized report to Urban Games after a crash or fatal error. stdout.txt starts again from scratch every time the game starts. When the game crashes, it also writes a copy with the time in its name: that copy is the one to use when you ask for help. When you send logs, take the newest files that share one name. Not every crash leaves all three.

When you ask for help, include:

  • Screenshots that show the problem
  • stdout.txt from the crash_dump folder (after a crash, the copy with the time in its name) and your settings.lua
  • The exact error message, if the game showed one
  • Your processor, graphics card and amount of memory
  • What you did just before the problem, and your last save from before it
  • What you have already tried

Other players can often help: in the Steam discussions, on Reddit, in German and English community forums, and in the many regional Discord communities. If nobody can help, Urban Games takes problem reports through the contact form on its support page. Send the details above and the newest dump file from the crash. At busy times answers can take a while; messages are handled in the order they arrive. Go to Urban Games support

Urban Games' own forum has a Support board, where staff answer crash reports and ask for logs. Urban Games forum, Support board

If nothing helps

Check the game files in your store app:

  • Steam: Restart the computer and open Steam. In your library, right-click the game, choose Properties, open Local files and click Verify integrity of game files. It can take a few minutes.
  • GOG: Run the installer from your GOG library again: it finds the installed game and replaces all game files, while your saves and settings stay. In GOG Galaxy, open the game's menu and choose Manage Installation › Verify / Repair.
  • Epic Games Store: In the Epic Games launcher, open your library, click the three dots next to Transport Fever 3 and choose Verify.

When checking the game files does not help, delete the game completely and install it again. This has fixed both a game that would not start at all and one that kept crashing to the desktop; in the first case Steam was reinstalled too.

Before you reinstall, make a copy of your saves: the save guide shows where they are and why the store's own backup leaves them out.

Frequently asked questions

Why does Transport Fever 3 keep crashing?

It depends on when it crashes. At startup, look at the graphics driver and the shader cache first; while loading a save, at the mods; while you play, at the processor and at the mods Urban Games names on its Known Issues page. Update the game before anything else: the latest builds, Version 40444, fix 6 crashes and errors.

How do I fix Transport Fever 3 crashing on startup?

Install the latest graphics driver; sometimes only a clean reinstall of the driver helps. Broken graphics or a crash right at startup can come from the shaders: try deleting the shader_cache folder. If that does not help, check the game files in your store app, and switch off overlays and recording or security software.

Why does Transport Fever 3 crash when I load a save?

Mods are the first thing to rule out. Load the save with all mods switched off. Sign out of the Mod Hub, then start the game again. Delete the shader_cache folder in your user data folder.

Where is the Transport Fever 3 crash log?

In the crash_dump folder inside your user data folder. With Steam on Windows that is C:\Program Files (x86)\Steam\userdata\<user-number>\3493540\local\crash_dump. The crash_dump folder collects three kinds of file: .dmp files with crash data for software to read, .json files describing your settings and hardware, and .txt files with the game's log. stdout.txt starts again from scratch every time the game starts. When the game crashes, it also writes a copy with the time in its name: that copy is the one to use when you ask for help.

Does Transport Fever 3 crash more on 13th or 14th Gen Intel processors?

Urban Games sees more crashes than usual on these processors, which can be unstable because of a hardware problem, and recommends updating the computer's BIOS to the latest version. Intel's support page has the details.

Can mods make Transport Fever 3 crash?

Yes. Urban Games saw more crashes on computers running the popular Park & Ride mod and advised switching it off. The mod's update of October 9, 2026 fixed the crashes, though small errors can still pop up while its author works on a full fix. If the game crashes while loading, load the save with all mods switched off.

Why does Transport Fever 3 go to a black screen?

The moment the game starts: update the graphics driver or reinstall it cleanly, and make sure the game runs on the separate graphics card rather than the built-in one. Right after you change a graphics setting: alt+Enter brings a window back; then choose a resolution your monitor can show. In the middle of a game, with the sound still running: install the newest graphics driver: an outdated one is the usual cause. The whole computer goes dark or switches off: it is shutting down to protect itself, most often from heat: watch the temperatures and turn the graphics down. The game sits in the taskbar, but no window shows: the window opened on another screen or past the edge: Win+Shift+Left or Right pulls it back, Alt+Enter switches to window mode.

How do I send a crash report to Urban Games?

With Send Crash Reports switched on in Settings › Advanced, the game sends an anonymized report to Urban Games after a crash or fatal error. For a crash that keeps coming back, write to Urban Games through the contact form on https://www.transportfever3.com/support/ with the newest dump file, the stdout.txt copy with the time in its name and your settings.lua.

Sources

Checked on October 10, 2026. Seen a crash we do not cover? Let us know.

Continue reading

Two high-speed trains on a walled railway through a modern Transport Fever 3 town, next to a busy streetNext stepCheck your build: the latest update may already fix your crash.Updates and Patch NotesEvery official update in plain English, the current build for each platform, a quick check for your own build, and whether a patch changes our data.Go there

Related guides